Best Hardware

Pipe Wrench can be used for personal, domestic, and industrial purposes. The 600 mm Pipe Wrench comprises a malleable cast iron body that is very hard and good in quality. Pipe Wrench has a very good design to improve the productivity and usage of the tool. The Pipe Wrench has two jaws to get a nice and firm grip. The Pipe Wrench has hook and heel jaws. Pipe Wrench is mostly used for threading the pipes. The Wrench is mainly used for gripping, fastening, loosening, etc.

Double Open End SpannerDouble Open Ended Spanner is generally used for tightening and loosening of rotary fasteners such as nuts and bolts. Double open end spanner is made up of high quality Cr-v Steel. It has Ni- Cr finish to prevent it from rusting. It's specially designed jaws allow slip free operation. It conforms to IS 2028-1998 std
. A one-piece wrench with a U-shaped opening that grips two opposite faces of the bolt or nut.  Double-ended, with a different-sized opening at each end. The ends are generally oriented at an angle of around 15 degrees to the longitudinal axis of the handle. This allows a greater range of movement in enclosed spaces by flipping the wrench over.
Product description

• Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102
• With flat heads
• Satin non-glare finish
• Jaw: ground precisely to exact nominal size for optimum contact areas
• Secure grip thanks to slim profile shaft
• Overloading indicated by deformation
• Top-grade industrial quality for the hardest of continuous use
• Chrome-vanadium steel 31CrV3
• What is double ended open spanner?
• Double Open Ended Spanner is generally used for tightening and loosening of rotary fasteners such as nuts and bolts. JK DOE spanner is made up of high quality Cr-v Steel. It has Ni- Cr finish to prevent it from rusting. It's specially designed jaws allow slip free operation.
• What are the advantages of a double-ended flat spanner?The jaws of a spanner are angled at about 15° on most models, and the handle, or shaft, is slim or flat. Advantage: open-ended and double-ended spanners allow work in confined spaces and are also suitable for union nuts and fasteners that are difficult to access. Work in confined spaces is possible
• DOUBLE OPEN-END SPANNERSDOUBLE OPEN-END SPANNER IN CRV STEEL / CARBON STEELCODE: MKF-DOES-1001
  •  Specification As Per DIN 3110
  •  Drop Forged From Chrome Vanadium Steel
  •  Fully Hardened And Tempered
  • Each Head Set At 15° Angle
  • Available In Fully Polished/ Satin Finish/ Matt Finish

Additional Information:

• Production Capacity: AS MANY REQUIRED

Non-sparking tools are made of materials that are non-ferrous and therefore reduce the risk of a spark being created while the tool is in use. Non-sparking tools protect against both fire and explosion in environment that may contain flammable solvents/liquids, flammable vapors, or flammable dusts or residues. When working in confined spaces and areas where flammable gases or dust are present, using a non sparking tool is the best practice in many cases.

Applications:

Oil & gas industry

Petrochemical

Chemical

Marine

Aerospace

Non-sparking tools are made of materials that are non-ferrous and therefore reduce the risk of a spark being created while the tool is in use. Non-sparking tools protect against both fire and explosion in environment that may contain flammable solvents/liquids, flammable vapors, or flammable dusts or residues. When working in confined spaces and areas where flammable gases or dust are present, using a non sparking tool is the best practice in many cases.

Applications:

Oil & gas industry

Petrochemical

Chemical

Marine

Aerospace

They are heavy duty drop forged ring slugging spanner specially designed for very heavy duty work. They are durable striking end gives extra utility while tightening and loosening with hammer. These are provided in different specification.

General Applications:

Oil and Gas Industry

PetroChemical

Chemical

Marine

Aerospace

Note:-

• Available Length- 8 inch                         

Non Sparking Pipe Wrench Pipe wrenches are required for varied mechanical applications and our range of pipe wrenches serve the exact purpose. Our manufacturers ensure that these are manufactured in accordance to the recommended industrial norms assisting us to cater to our clients’ diversified requirements. With proper storage and packaging the quality of our range remains unchanged.

Salient features of our pipe wrench are:
• Durable
• Defect free
• Rust free

Widely used in a explosive and flammable place; fastening or removing bigger metal pipe or Cylindrical parts. It is the most conventional tool in pipe installation and repairing work.
IS 4595 Certified - Comes with a Test Certificate 

Additional Information:

Production Capacity: 100

Delivery Time: Ready Stock

Packaging Details: Individual packing with Test Certificate

Additional Information:

• Production Capacity: As many as required
• Delivery Time: 1 day

Description

• Podgers are used for erecting scaffolding and steel scenery.
• The pointed end will align the bolt holes while the other end with its reversible ratchet socket wil.
• Each podger fits two sizes and, as there is a clear hole right through the head,.
• spanner can be slid down studding or over long bolts without grounding.
• 24mm x 30mm black phosphate.

• Imported from UK (Sizes & Specifications are based on the UK Market).

Podgers are used for erecting scaffolding and steel scenery. The
pointed end will align the bolt holes while the other end with
its reversible ratchet socket will tighten the nuts. Each podger
fits two sizes and, as there is a clear hole right through the
head, spanner can be slid down studding or over long bolts
without grounding All have tethering points for lanyards to clip
on to. AVALIABLE IN MANY SIZES AND FINISHES SEE OTHER LISTINGS.

Additional Information:

• Delivery Time: 1 DAY

Non Sparking Tools are Most Suited For

Application Purposes In Potentially Explosive Environments.

Most of our Non Sparking Tools are Forged after Casting to achieve

better Quality, Performance & Attractive Finish. Available in all Sizes.

 

Aluminium-Bronze Alloy

Composition

Al: 10%-12%

Ni: 4%-6%

Fe + Mn <5.8%

Other: <0.5%

Rest: Cu

Hardness 25-30HRc (250-291 Brinell)

Tensile Strength 800 N/mm 2