Call 07942563569 88% Response Rate

our range

Spanners

Spanners usually operated by hand, for tightening bolts and nuts. Basically, a spanners consists of a stout lever with a notch at one or both ends for gripping the bolt or nut in such a way that it can be twisted by a pull on the spanners at right angles to the axes of the lever and the bolt or nut. Some spanners have ends with straight-sided slots that fit over the part being tightened; these tools are known as  open-end spanners and are made in various sizes to fit specific bolt and nut sizes.

 Box-end spanners have ends that enclose the nut and have 6, 8, 12, or 16 points inside the head. A spanners with 12 points is used on either a hexagonal or a square nut; the 8- and 16-point spanners are used on square members. Because the sides of the box are thin, these spanners are suitable for turning nuts that are hard to reach with an open-end spanners.

More From Britannica hand tool: Screwdrivers and spanners

When a nut or a bolt head is in a recess below the surface of a bolted member, a socket spanners must be used; this is essentially a short pipe with a square or hexagonal hole and either an integral or a removable handle. Modern socket spanners are made in sets, consisting of a number of short sockets with a square hole in one end that fits a removable handle and 8- or 12-point holes in the other end to fit various bolt and nut sizes. There are several types of handles and extensions, such as a T handle, screwdriver-grip handle, and a ratchet handle (see ratchet).

A useful accessory for a socket-spanners set is a handle equipped with a mechanism that measures the amount of torque, or turning effort, exerted by the spanners on the nut or bolt. One type of torque handle has two arms attached to the head, which carries the socket that fits the bolt or nut to be tightened; one arm carries the torque-indicating scale and remains fixed relative to the head, while the other arm carries the handgrip and is bent, relative to the head and the scale, when a bolt is tightened. A pointer on the bent arm indicates the torque on the scale. The purpose of a torque spanners is to make sure that screws and bolts in bolted assemblies are installed with sufficient tightness to prevent loosening during use.

 

  • 6 Point Striking Slugging Wrench
  • 6 Point Striking Slugging Wrench
  • 6 Point Striking Slugging Wrench
  • 6 Point Striking Slugging Wrench
  • 6 Point Striking Slugging Wrench
  • 6 Point Striking Slugging Wrench
  • 6 Point Striking Slugging Wrench
  • 6 Point Striking Slugging Wrench
  • 6 Point Striking Slugging Wrench
  • 6 Point Striking Slugging Wrench
  • 6 Point Striking Slugging Wrench
  • 6 Point Striking Slugging Wrench
6 Point Striking Slugging Wrench

6 Point Striking Slugging Wrench

Rs 200  / PieceGet Best Price

Product Brochure

BrandProto USA
MaterialMetal
FinishingBF (BlackPhosphated)
Size27mm to 100mm
Type Of ToolWrench
ColorBlack
Weight1.5 Kg
  • Black oxide finish
  • Large striking surface for surer blow contact and more efficient transmittal of force to fastener.
  • For use where extreme force is necessary to loosen or set large fasteners.
  • Straight handle design helps prevent the wrench from cocking when struck.
  • Heavy box walls provide greater torque transmission., Made in USA

View Complete details

get quote request a call back
  • Deep Offset Slogging Ring Spanner
  • Deep Offset Slogging Ring Spanner
  • Deep Offset Slogging Ring Spanner
  • Deep Offset Slogging Ring Spanner
  • Deep Offset Slogging Ring Spanner
  • Deep Offset Slogging Ring Spanner
  • Deep Offset Slogging Ring Spanner
  • Deep Offset Slogging Ring Spanner
  • Deep Offset Slogging Ring Spanner
  • Deep Offset Slogging Ring Spanner
  • Deep Offset Slogging Ring Spanner
  • Deep Offset Slogging Ring Spanner
  • Deep Offset Slogging Ring Spanner
  • Deep Offset Slogging Ring Spanner
Deep Offset Slogging Ring Spanner

Deep Offset Slogging Ring Spanner

Rs 1,000  / PieceGet Best Price

Product Brochure

Size18 inches
Type Of SpannerStriking Wrench
PackagingPacket
MaterialAlloy Steel
BrandPROTO USA
Warranty1 Year
FinishBlack Oxide
Handle TypeOffset
Overall Length13 inch
Head Size2 inch

Best hardware provides all types of Slugging Wrench spanners in a quality range and in all type of varieties as best price possible

Slugging Wrench Product description

  • Top-grade industrial quality for the hardest of continuous use
  • For heavy-duty work
  • Special sizes available on request up to 250 mm
  • Up to length 435 mm made of chrome vanadium steel 31CrV3, from length 480 mm made of material C35
  • * not standardised
  • Acc. to DIN 7444

What is Slugging Wrench?
A Slugging Wrenchr has a thick end that is designed to be used with a hammer to tighten fasteners, such as nuts and bolts to a precise torque. Slugging Wrench are also ideal to untighten fasteners which are stuck, as they pass high levels of force and vibration through to the nut or bolt when hit with a hammer.
What do you use a Slugging Wrench for?A Slugging Wrench has a thick end that is designed to be used with a hammer to tighten fasteners, such as nuts and bolts to a precise torque. s are also ideal to untighten fasteners which are stuck, as they pass high levels of force and vibration through to the nut or bolt when hit with a hammer.

How Slugging Wrenches are manufactured?Spanner are manufactured under proper supervision using quality tested metal and advanced technology.

Slugging Wrench spanner 1. Drop forged from high tensile alloy. 2. Machined to closed tolerances to ISO specifications. 3. Heat treated to achieve optimum Impact resistance. 4. Electroplating followed by black oxidizing to prevent from rusting. 5. Larger striking area to increase safety in use. 6. Greater sectional area for longer life. 7. Hexagon opening depth to ensure positive seating on nuts / bolts. 8. Chamferred openings for ease of location on nuts / bolts. 9. Greater offset height allows clear hammering in offset  Slogging Spanners. 10. Clear marking of size and model.

Features of Best Hardware Slugging Wrenches / Striking Wrenches / Podger Spanners

  • Best hardware Slugging Wrenches / Striking Wrenches have the heaviest construction on the market.
  • Slugging Wrenches / Striking Wrenches wall and thickness optimized for heavy impact
  • Best hardware also manufactures castellated wrenches for use on GE turbines. Along with castellated wrench, GE turbine tools like castellated sockets, stack sockets, Striking Wrenches, slugging wrenches, podger spanners, slugging spanners are also manufactured.
  • Hammer /Hammering Wrenches are available in all metric and inch sizes upto 9 1/4" (230 mm) A/F.
  • Best hardwaare also manufactures podger spanners or podger wrenches (Structured Wrenches).
  • Why Best Hardware Slugging Wrenches, Striking Wrenches, Hammering Wrenches or Castellated Wrench?
    • Value of Slugging / Striking Wrenches: In the competitive world of today, savings matter! You get the life of the slugging wrench tools you expect at a fraction of the cost you currently pay!
    • Quality of Slugging / Striking Wrenches: Large percentage of our revenues are spent in improving designs and life of our products. New innovations on products in this  catalogue are world’s firsts - ONLY WITH BEST HARDWARE.
    • Service of Best Hardware in Slugging / Striking Wrenches: Best hardware is one of the world’s top 3 
    • Experience of Best Hardware for Slugging / Striking Wrenches: You need experience to handle the vast array of products like castellated wrench, slugging wrench etc. We have been in the business since 1971.

View Complete details

get quote request a call back
  • Half Moon Ring Spanner
  • Half Moon Ring Spanner
  • Half Moon Ring Spanner
  • Half Moon Ring Spanner
  • Half Moon Ring Spanner
  • Half Moon Ring Spanner
  • Half Moon Ring Spanner
  • Half Moon Ring Spanner
Half Moon Ring Spanner

Half Moon Ring Spanner

Rs 999  / SetGet Best Price

Product Brochure

Type Of SpannerHalf Moon Spanner
Usage/ApplicationGarage
MaterialChrome Vanadium Steel
PackagingPacket
Size10x11mm To 18x19mm
Measurement SystemMetric
FinishingPolished
ColorSilver
Warranty1 Year
Country of OriginMade in India
This listing is for set of half moon ring spanners as pictured.

Designed for use in areas with limited access and where a standard spanner may not be able to get in, such as the top nut on an exhaust pipe or manifold.

Made from chrome vanadium steel.

Double hex (12 point) design helps the positioning of the spanner in even the tightest of areas.

Finished in a Satin Finish.

Supplied complete with its own canvas tool roll for compact storage and transportation.

Includes sizes;

18mm x 19mm Moon Spanner
16mm x 17mm Moon Spanner
14mm x 15mm Moon Spanner
12mm x 13mm Moon Spanner
10mm x 11mm Moon Spanner

View Complete details

get quote request a call back
  • Double Ended Ratchet Spanner
  • Double Ended Ratchet Spanner
  • Double Ended Ratchet Spanner
  • Double Ended Ratchet Spanner
  • Double Ended Ratchet Spanner
  • Double Ended Ratchet Spanner
  • Double Ended Ratchet Spanner
  • Double Ended Ratchet Spanner
  • Double Ended Ratchet Spanner
Double Ended Ratchet Spanner

Double Ended Ratchet Spanner

Rs 325  / PieceGet Best Price

Product Brochure

Type Of SpannerRing Spanner
Size22 mm to 100 mm
PackagingBox
MaterialAluminum
BrandJETECH
Measurement SystemSAE
ColorSilver
Usage/ApplicationGarage
A ratchet spanner uses a mechanism which allows an open-ended, flare or ring head to turn a fastener in one direction but not the other while remaining fitted to the fastener head.

View Complete details

get quote request a call back
  • Spanners And Wrenches
  • Spanners And Wrenches
  • Spanners And Wrenches
  • Spanners And Wrenches
  • Spanners And Wrenches
  • Spanners And Wrenches
  • Spanners And Wrenches
  • Spanners And Wrenches
  • Spanners And Wrenches
  • Spanners And Wrenches
Spanners And Wrenches

Spanners And Wrenches

Rs 280  / PieceGet Best Price

Product Brochure

Size14 mm
Type Of SpannerRing Spanner
PackagingPacket
MaterialChromium vanadium
BrandTaparia
Measurement SystemMetric
Finishingmatte or polished
Colormulticolor
Usage/ApplicationGarage
Warranty1 Year
best hardware provides all types of spanners in a quality range and in all type of varieties as best price possible

View Complete details

get quote request a call back
  • Open End Slugging Wrench
  • Open End Slugging Wrench
  • Open End Slugging Wrench
  • Open End Slugging Wrench
  • Open End Slugging Wrench
  • Open End Slugging Wrench
  • Open End Slugging Wrench
  • Open End Slugging Wrench
Open End Slugging Wrench

Open End Slugging Wrench

Rs 450  / PieceGet Best Price

Product Brochure

Size18 inches
Type Of SpannerSingle Ended Spanner
PackagingBox
Materialchrome-vanadium steel 31CrV3
BrandGedore
ColorBlack
Usage/ApplicationGarage
Warranty1 Year
Part No.6401230
Country of OriginMade in India
Slogging Spanners

A slogging spanner has a thick end that is designed to be used with a hammer to tighten fasteners, such as nuts and bolts to a precise torque.
Slogging spanners are also ideal to untighten fasteners which are stuck, as they pass high levels of force and vibration through to the nut or bolt when hit with a hammer.

Sometimes known as a 'hammer wrench', we sell slogging ring spanners and open end slogging spanners made

Best hardware provides all types of Slugging Wrench spanners in a quality range and in all type of varieties as best price possible

Slugging Wrench Product description

  • Top-grade industrial quality for the hardest of continuous use
  • For heavy-duty work
  • Special sizes available on request up to 250 mm
  • Up to length 435 mm made of chrome vanadium steel 31CrV3, from length 480 mm made of material C35
  • * not standardised
  • Acc. to DIN 7444

What is Slugging Wrench?
A Slugging Wrenchr has a thick end that is designed to be used with a hammer to tighten fasteners, such as nuts and bolts to a precise torque. Slugging Wrench are also ideal to untighten fasteners which are stuck, as they pass high levels of force and vibration through to the nut or bolt when hit with a hammer.
What do you use a Slugging Wrench for?
A Slugging Wrench has a thick end that is designed to be used with a hammer to tighten fasteners, such as nuts and bolts to a precise torque. s are also ideal to untighten fasteners which are stuck, as they pass high levels of force and vibration through to the nut or bolt when hit with a hammer.

How Slugging Wrenches are manufactured?Spanner are manufactured under proper supervision using quality tested metal and advanced technology.

Slugging Wrench spanner 1. Drop forged from high tensile alloy. 2. Machined to closed tolerances to ISO specifications. 3. Heat treated to achieve optimum Impact resistance. 4. Electroplating followed by black oxidizing to prevent from rusting. 5. Larger striking area to increase safety in use. 6. Greater sectional area for longer life. 7. Hexagon opening depth to ensure positive seating on nuts / bolts. 8. Chamferred openings for ease of location on nuts / bolts. 9. Greater offset height allows clear hammering in offset  Slogging Spanners. 10. Clear marking of size and model.

Features of Best Hardware Slugging Wrenches / Striking Wrenches / Best hardware Slugging Wrenches / Striking Wrenches have the heaviest construction on the market.

  • Slugging Wrenches / Striking Wrenches wall and thickness optimized for heavy impact
  • Best hardware also manufactures castellated wrenches for use on GE turbines. Along with castellated wrench, GE turbine tools like castellated sockets, stack sockets, Striking Wrenches, slugging wrenches, podger spanners, slugging spanners are also manufactured.
  • Hammer /Hammering Wrenches are available in all metric and inch sizes upto 9 1/4" (230 mm) A/F.
  • Why Best Hardware Slugging Wrenches, Striking Wrenches, Hammering Wrenches or Castellated Wrench?
    • Value of Slugging / Striking Wrenches: In the competitive world of today, savings matter! You get the life of the slugging wrench tools you expect at a fraction of the cost you currently pay!
    • Quality of Slugging / Striking Wrenches: Large percentage of our revenues are spent in improving designs and life of our products. New innovations on products in this  catalogue are world’s firsts - ONLY WITH BEST HARDWARE.
    • Experience of Best Hardware for Slugging / Striking Wrenches: You need experience to handle the vast array of products like castellated wrench, slugging wrench etc. We have been in the business since 1971.

View Complete details

get quote request a call back
  • Slogging Slugging Flogging Hammering Stricking Ring spannner
  • Slogging Slugging Flogging Hammering Stricking Ring spannner
  • Slogging Slugging Flogging Hammering Stricking Ring spannner
  • Slogging Slugging Flogging Hammering Stricking Ring spannner
  • Slogging Slugging Flogging Hammering Stricking Ring spannner
  • Slogging Slugging Flogging Hammering Stricking Ring spannner
  • Slogging Slugging Flogging Hammering Stricking Ring spannner
  • Slogging Slugging Flogging Hammering Stricking Ring spannner
  • Slogging Slugging Flogging Hammering Stricking Ring spannner
  • Slogging Slugging Flogging Hammering Stricking Ring spannner
  • Slogging Slugging Flogging Hammering Stricking Ring spannner
  • Slogging Slugging Flogging Hammering Stricking Ring spannner
  • Slogging Slugging Flogging Hammering Stricking Ring spannner
  • Slogging Slugging Flogging Hammering Stricking Ring spannner
Slogging Slugging Flogging Hammering Stricking Ring spannner

Slogging Slugging Flogging Hammering Stricking Ring spannner

Rs 100  / PieceGet Best Price

Minimum Order Quantity: 5 Piece

Product Brochure

Type Of SpannerRing Spanner
Size22mm-135mm
PackagingBox
MaterialCarbon Steel
Measurement SystemSAE, Metric
FinishingDrop Forged
ColorBlack
Usage/ApplicationIndustrial
Warranty1 Year
Product Code306 (MM) / 306 (AF)
Hardness30-35
SurfaceBLACK FINISH
Steel Grade31CRV
Weight5KG
Quantity Per Pack15
Country of OriginMade in India
Slogging Spanners

A slogging spanner has a thick end that is designed to be used with a hammer to tighten fasteners, such as nuts and bolts to a precise torque.
Slogging spanners are also ideal to untighten fasteners which are stuck, as they pass high levels of force and vibration through to the nut or bolt when hit with a hammer.

Sometimes known as a 'hammer wrench', we sell slogging ring spanners and open end slogging spanners made

Best hardware provides all types of Slugging Wrench spanners in a quality range and in all type of varieties as best price possible

Slugging Wrench Product description

  • Top-grade industrial quality for the hardest of continuous use
  • For heavy-duty work
  • Special sizes available on request up to 250 mm
  • Up to length 435 mm made of chrome vanadium steel 31CrV3, from length 480 mm made of material C35
  • * not standardised
  • Acc. to DIN 7444

What is Slugging Wrench?
A Slugging Wrenchr has a thick end that is designed to be used with a hammer to tighten fasteners, such as nuts and bolts to a precise torque. Slugging Wrench are also ideal to untighten fasteners which are stuck, as they pass high levels of force and vibration through to the nut or bolt when hit with a hammer.
What do you use a Slugging Wrench for?
A Slugging Wrench has a thick end that is designed to be used with a hammer to tighten fasteners, such as nuts and bolts to a precise torque. s are also ideal to untighten fasteners which are stuck, as they pass high levels of force and vibration through to the nut or bolt when hit with a hammer.

How Slugging Wrenches are manufactured?Spanner are manufactured under proper supervision using quality tested metal and advanced technology.

Slugging Wrench spanner 1. Drop forged from high tensile alloy. 2. Machined to closed tolerances to ISO specifications. 3. Heat treated to achieve optimum Impact resistance. 4. Electroplating followed by black oxidizing to prevent from rusting. 5. Larger striking area to increase safety in use. 6. Greater sectional area for longer life. 7. Hexagon opening depth to ensure positive seating on nuts / bolts. 8. Chamferred openings for ease of location on nuts / bolts. 9. Greater offset height allows clear hammering in offset  Slogging Spanners. 10. Clear marking of size and model.

Features of Best Hardware Slugging Wrenches / Striking Wrenches / Best hardware Slugging Wrenches / Striking Wrenches have the heaviest construction on the market.

  • Slugging Wrenches / Striking Wrenches wall and thickness optimized for heavy impact
  • Best hardware also manufactures castellated wrenches for use on GE turbines. Along with castellated wrench, GE turbine tools like castellated sockets, stack sockets, Striking Wrenches, slugging wrenches, podger spanners, slugging spanners are also manufactured.
  • Hammer /Hammering Wrenches are available in all metric and inch sizes upto 9 1/4" (230 mm) A/F.
  • Why Best Hardware Slugging Wrenches, Striking Wrenches, Hammering Wrenches or Castellated Wrench?
    • Value of Slugging / Striking Wrenches: In the competitive world of today, savings matter! You get the life of the slugging wrench tools you expect at a fraction of the cost you currently pay!
    • Quality of Slugging / Striking Wrenches: Large percentage of our revenues are spent in improving designs and life of our products. New innovations on products in this  catalogue are world’s firsts - ONLY WITH BEST HARDWARE.
    • Experience of Best Hardware for Slugging / Striking Wrenches: You need experience to handle the vast array of products like castellated wrench, slugging wrench etc. We have been in the business since 1971.


Additional Information:

  • Item Code: 8204
  • Production Capacity: As many as required
  • Delivery Time: 1 DAY

View Complete details

get quote request a call back
  • Industrial Combination Spanners
  • Industrial Combination Spanners
  • Industrial Combination Spanners
  • Industrial Combination Spanners
  • Industrial Combination Spanners
  • Industrial Combination Spanners
  • Industrial Combination Spanners
  • Industrial Combination Spanners
Industrial Combination Spanners

Industrial Combination Spanners

Rs 999  / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Brochure

Type Of SpannerCombination spanners
Size60mm
PackagingBox
Materialvanadium steel 31CrV3
BrandGEDORE
Model Name/NumberGEDORE 6004070
ColorSilver
Usage/ApplicationIndustrial
Warranty1 Year
Head ShapeRound
ApplicationGarage
Country of OriginMade in India
  • Version according to DIN 3113 form B, ISO 3318, ISO 7738
  • ring side bent 10 °
  • size 5 and 5.5 mm with 6-sided ring, from 6 mm with UD profile
  • GEDORE vanadium steel 31CrV3, chromed

View Complete details

get quote request a call back
  • Ring Spanners Set
  • Ring Spanners Set
  • Ring Spanners Set
  • Ring Spanners Set
  • Ring Spanners Set
  • Ring Spanners Set
  • Ring Spanners Set
  • Ring Spanners Set
  • Ring Spanners Set
  • Ring Spanners Set
  • Ring Spanners Set
Ring Spanners Set

Ring Spanners Set

Rs 250  / SetGet Best Price
Type Of SpannerRing Spanner
BrandTaparia
PackagingBox
Materialchrome vanadium steel
ColorSilver
Usage/Applicationimprove access to the nut or bolt.
I Deal InNew Only
best hardware provides all types of spanners in a quality range and in all type of varieties as best price possible

View Complete details

get quote request a call back
  • De Neers Combination Spanner
  • De Neers Combination Spanner
  • De Neers Combination Spanner
  • De Neers Combination Spanner
  • De Neers Combination Spanner
  • De Neers Combination Spanner
  • De Neers Combination Spanner
  • De Neers Combination Spanner
  • De Neers Combination Spanner
  • De Neers Combination Spanner
  • De Neers Combination Spanner
  • De Neers Combination Spanner
  • De Neers Combination Spanner
  • De Neers Combination Spanner
De Neers Combination Spanner

De Neers Combination Spanner

Rs 225  / PieceGet Best Price
Size22mm
MaterialCarbon Steel
PackagingPacket
BrandDeNeers
Measurement SystemMetric
Finishingmatte or polished
ColorSilver
Usage/ApplicationTightens/loosens nuts and bolts
Warranty1 Year
ApplicationGarage
Country of OriginMade in India
best hardware provides all types of spanners in a quality range and in all type of varieties as best price possible

View Complete details

get quote request a call back
  • RING SPANNER
  • RING SPANNER
  • RING SPANNER
  • RING SPANNER
  • RING SPANNER
  • RING SPANNER
  • RING SPANNER
  • RING SPANNER
RING SPANNER

RING SPANNER

Rs 999  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Type Of SpannerRing Spanner
PackagingBox
MaterialChrome Vanadium Steel
Finishingblack phosphate
ColorSilver, Black
Warranty1 Year
Hardness30-35 HRC
Ring Spanner Size120MM
Country of OriginMade in India
Slogging Spanners

A slogging spanner has a thick end that is designed to be used with a hammer to tighten fasteners, such as nuts and bolts to a precise torque.
Slogging spanners are also ideal to untighten fasteners which are stuck, as they pass high levels of force and vibration through to the nut or bolt when hit with a hammer.

Sometimes known as a 'hammer wrench', we sell slogging ring spanners and open end slogging spanners made

Best hardware provides all types of Slugging Wrench spanners in a quality range and in all type of varieties as best price possible

Slugging Wrench Product description

  • Top-grade industrial quality for the hardest of continuous use
  • For heavy-duty work
  • Special sizes available on request up to 250 mm
  • Up to length 435 mm made of chrome vanadium steel 31CrV3, from length 480 mm made of material C35
  • * not standardised
  • Acc. to DIN 7444

What is Slugging Wrench?
A Slugging Wrenchr has a thick end that is designed to be used with a hammer to tighten fasteners, such as nuts and bolts to a precise torque. Slugging Wrench are also ideal to untighten fasteners which are stuck, as they pass high levels of force and vibration through to the nut or bolt when hit with a hammer.
What do you use a Slugging Wrench for?
A Slugging Wrench has a thick end that is designed to be used with a hammer to tighten fasteners, such as nuts and bolts to a precise torque. s are also ideal to untighten fasteners which are stuck, as they pass high levels of force and vibration through to the nut or bolt when hit with a hammer.

How Slugging Wrenches are manufactured?Spanner are manufactured under proper supervision using quality tested metal and advanced technology.

Slugging Wrench spanner 1. Drop forged from high tensile alloy. 2. Machined to closed tolerances to ISO specifications. 3. Heat treated to achieve optimum Impact resistance. 4. Electroplating followed by black oxidizing to prevent from rusting. 5. Larger striking area to increase safety in use. 6. Greater sectional area for longer life. 7. Hexagon opening depth to ensure positive seating on nuts / bolts. 8. Chamferred openings for ease of location on nuts / bolts. 9. Greater offset height allows clear hammering in offset  Slogging Spanners. 10. Clear marking of size and model.

Features of Best Hardware Slugging Wrenches / Striking Wrenches / Best hardware Slugging Wrenches / Striking Wrenches have the heaviest construction on the market.

  • Slugging Wrenches / Striking Wrenches wall and thickness optimized for heavy impact
  • Best hardware also manufactures castellated wrenches for use on GE turbines. Along with castellated wrench, GE turbine tools like castellated sockets, stack sockets, Striking Wrenches, slugging wrenches, podger spanners, slugging spanners are also manufactured.
  • Hammer /Hammering Wrenches are available in all metric and inch sizes upto 9 1/4" (230 mm) A/F.
  • Why Best Hardware Slugging Wrenches, Striking Wrenches, Hammering Wrenches or Castellated Wrench?
    • Value of Slugging / Striking Wrenches: In the competitive world of today, savings matter! You get the life of the slugging wrench tools you expect at a fraction of the cost you currently pay!
    • Quality of Slugging / Striking Wrenches: Large percentage of our revenues are spent in improving designs and life of our products. New innovations on products in this  catalogue are world’s firsts - ONLY WITH BEST HARDWARE.
    • Experience of Best Hardware for Slugging / Striking Wrenches: You need experience to handle the vast array of products like castellated wrench, slugging wrench etc. We have been in the business since 1971.


Additional Information:

  • Production Capacity: AS MANY REQUIRED
  • Delivery Time: 1 DAY

View Complete details

get quote request a call back
  • Taparia Single Ended Open Jaw Spanner
  • Taparia Single Ended Open Jaw Spanner
  • Taparia Single Ended Open Jaw Spanner
  • Taparia Single Ended Open Jaw Spanner
  • Taparia Single Ended Open Jaw Spanner
  • Taparia Single Ended Open Jaw Spanner
  • Taparia Single Ended Open Jaw Spanner
  • Taparia Single Ended Open Jaw Spanner
  • Taparia Single Ended Open Jaw Spanner
  • Taparia Single Ended Open Jaw Spanner
Taparia Single Ended Open Jaw Spanner

Taparia Single Ended Open Jaw Spanner

Rs 100  / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Brochure

Type Of SpannerSingle Ended Spanner
Size32 mm
Model Name/NumberDIN 894
BrandTaparia
PackagingBox
MaterialCast Iron
FinishingPolished
ColorBlack
TechniqueHot Rolled
Usage/ApplicationAutomobile Industry
Warranty1 Year, No Warranty
Country of OriginMade in India
  • Made from high grade chrome vanadium steel
  • Scientifically heat treated to give maximum strength and wear resistance
  • Hardness: 40 – 50 HRC
  • Slightly rounded handles-sand blasted –fit snugly in the hand and gives comfortable grip
  • Good accessibility in confined spaces due to slim and practical design
DIN 894 – ISO 3318
  • Metric sizes from 6mm to 135mm forged from special tool steel and hardened to 120kg/mm² for high torque applications i.e. Construction, Heavy Industry, Railways, Shipyards, Mines, Farming, Oil rigs etc.
  • Jaws ground precisely to exact size
  • Extra long shaft for deep applications
  • High Bending Strength: Spanner does not fracture or splinter when overloaded.
  • Ergonomy: Profile designed for more efficiency, open end angled at 15°.
  • Manganese-Phosphate finish with hanging hole.

View Complete details

get quote request a call back
  • Single Open End Spanner
  • Single Open End Spanner
  • Single Open End Spanner
Single Open End Spanner

Single Open End Spanner

Rs 99  / PieceGet Best Price
Size24 mm
Type Of SpannerSingle Ended Spanner
PackagingPacket
MaterialCarbon Steel
Measurement SystemMetric
FinishingBlack Phosphate
ColorBlack
Usage/ApplicationBolt Tightening And Loosening
Warranty1 Year
Country of OriginMade in India
we are the leading suppliers in this industry we cater all types of client all over india we provide products in bulk and at best price possible.

View Complete details

get quote request a call back
  • Jumbo Combination Spanners
  • Jumbo Combination Spanners
  • Jumbo Combination Spanners
  • Jumbo Combination Spanners
  • Jumbo Combination Spanners
  • Jumbo Combination Spanners
  • Jumbo Combination Spanners
  • Jumbo Combination Spanners
Jumbo Combination Spanners

Jumbo Combination Spanners

Rs 999  / PieceGet Best Price
Type Of SpannerCOMBINATION SPANNER
PackagingBox
MaterialCarbon Steel
Measurement SystemMetric, SAE
Finishingumbo combination spanners, also known as large or heavy-duty combination spanners, are tools used fo
ColorSilver, Black
Usage/Applicationumbo combination spanners, also known as large or heavy-duty combination spanners, are tools used fo
Warranty1 Year
Head ShapeRound
ApplicationGarage
Country of OriginMade in India

Jumbo combination spanners, also known as large or heavy-duty combination spanners, are tools used for tightening or loosening large nuts and bolts. They are designed to provide a high amount of torque and are commonly used in industries such as automotive, construction, and manufacturing.

Here are some key features and characteristics of jumbo combination spanners:

  1. Size: Jumbo combination spanners are typically larger than regular spanners to accommodate bigger fasteners. They come in various sizes, starting from around 32mm (1.25 inches) and can go up to several inches in size.

  2. Double-ended: Like regular combination spanners, jumbo combination spanners have a double-ended design. One end has an open jaw, while the other end has a closed, ring-shaped jaw. This allows for versatility in different applications.

  3. Material: Jumbo combination spanners are usually made from high-quality and durable materials such as chrome vanadium steel or alloy steel. These materials provide strength, longevity, and resistance to corrosion.

  4. Torque capabilities: These spanners are designed to handle high torque applications. They provide increased leverage and a longer handle compared to regular spanners, allowing for greater force to be applied.

  5. Precision engineering: Jumbo combination spanners are often precision-engineered for accurate fit and reduced wear. The jaws are usually machined to ensure proper grip on the fasteners, minimizing the risk of slipping.

  6. Increased length: Jumbo spanners are longer in length compared to standard spanners, providing more leverage and torque when working on large bolts or nuts.

  7. Ergonomic design: Many jumbo combination spanners feature ergonomic handles or grips to provide comfort and reduce user fatigue during extended use.

  8. Industrial applications: Jumbo combination spanners are commonly used in heavy-duty industrial applications where large fasteners need to be tightened or loosened. This includes sectors such as construction, mining, oil and gas, and heavy machinery.

When working with jumbo combination spanners, it's important to follow safety precautions, such as using appropriate personal protective equipment (PPE) and ensuring the tool is correctly sized and fitted onto the fastener to avoid slippage and potential injury.

Note: The specific sizes, designs, and features of jumbo combination spanners may vary among manufacturers.

Certainly! Here's some additional information about jumbo combination spanners:

 

  1. Types of Jaws: Jumbo combination spanners can come with different types of jaws to suit specific applications. Some common types include:

    • 12-point (or double hex) jaws: These jaws have 12 contact points, providing a better grip on fasteners and reducing the risk of rounding off corners.

    • Bi-hexagonal (or 6-point) jaws: These jaws have 6 contact points, offering increased torque and strength.

    • Offset jaws: Some jumbo combination spanners have an offset design, which allows for better accessibility in tight or confined spaces.

  2. Ongoing Advancements: As with other tools, there may be ongoing advancements in jumbo combination spanners. Manufacturers may introduce features such as improved ergonomics, enhanced materials, or specialized coatings to increase durability and performance.

  3. Impact-Resistant: Certain jumbo combination spanners are designed to be impact-resistant, capable of withstanding high-impact applications. These spanners are often used with impact wrenches or power tools.

  4. Size Indicators: To make it easier to identify the size of a jumbo combination spanner, manufacturers often engrave or stamp the size measurement directly on the tool.

View Complete details

get quote request a call back
  • 6mm Ratchet Spanner
  • 6mm Ratchet Spanner
  • 6mm Ratchet Spanner
6mm Ratchet Spanner

6mm Ratchet Spanner

Rs 499  / PieceGet Best Price
Drive Size1/4 Inch
Type Of SpannerRatchet Spanner
Size6mm
PackagingBox
MaterialCarbon Steel
Measurement SystemMetric, SAE
FinishingChrome Plated
ColorSilver
Usage/ApplicationGarage
Warranty1 Year
Country of OriginMade in India
we are the leading suppliers in this industry we cater all types of client all over india we provide products in bulk and at best price possible.

View Complete details

get quote request a call back
  • Chrome Vanadium Ring Spanner
  • Chrome Vanadium Ring Spanner
  • Chrome Vanadium Ring Spanner
Chrome Vanadium Ring Spanner

Chrome Vanadium Ring Spanner

Rs 99  / PieceGet Best Price
MaterialChrome Vanadium Alloy Steel
Type Of SpannerRing Spanner
Size6X7 - 75X80mm
PackagingBox
Measurement SystemSAE, Metric
FinishingChrome Plated
ColorSilver
Usage/ApplicationBolt Tightening And Loosening
Warranty1 Year
Country of OriginMade in India
we are the leading suppliers in this industry we cater all types of client all over india we provide products in bulk and at best price possible.

View Complete details

get quote request a call back
  • C Hook Spanner
  • C Hook Spanner
  • C Hook Spanner
C Hook Spanner

C Hook Spanner

Rs 999  / PieceGet Best Price
Size14 mm
Type Of SpannerC Hook Spanner
PackagingBox
MaterialCarbon Steel
Measurement SystemSAE, Metric
FinishingBlack Phosphate
ColorBlack
Usage/ApplicationGarage
Warranty1 Year
ShapeC Hook Shape
Country of OriginMade in India
we are the leading suppliers in this industry we cater all types of client all over india we provide products in bulk and at best price possible.

View Complete details

get quote request a call back
  • Double Open End Spanner
  • Double Open End Spanner
  • Double Open End Spanner
Double Open End Spanner

Double Open End Spanner

Rs 428  / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Type Of SpannerDouble Open End Spanner
Size25 mm
PackagingBox
MaterialAluminum
BrandVigor
Model Name/NumberV1461N
FinishingChrome Vandium
ColorSilver
Usage/ApplicationTightens/loosens nuts and bolts
Warranty1 Year
ApplicationGarage
Country of OriginMade in India
Note:-
  • Available Size- 28 mm   
  • We "Best Hardware" are engaged in manufacturing, supplying and exporting of the wide range of Hand tools. we supply our hand tools all over India.     

View Complete details

get quote request a call back
  • Adjustable Spanner Drop Forged, Hardened Jaws & Heavy Duty Spanner
  • Adjustable Spanner Drop Forged, Hardened Jaws & Heavy Duty Spanner
  • Adjustable Spanner Drop Forged, Hardened Jaws & Heavy Duty Spanner
Adjustable Spanner Drop Forged, Hardened Jaws & Heavy Duty Spanner

Adjustable Spanner Drop Forged, Hardened Jaws & Heavy Duty Spanner

Rs 199  / PieceGet Best Price
MaterialChrome Vanadium Steel
Size8 Inch
Usage/ApplicationIndustrial
I Deal InNew Only
Warranty1 Year
Country of OriginMade in India

An adjustable spanner, often known as an adjustable wrench or a crescent wrench, is a versatile hand tool commonly used for tightening or loosening nuts, bolts, and other fasteners. The description you provided indicates specific features of an adjustable spanner, which are important for its durability and effectiveness:

  1. Drop Forged: The term "drop forged" refers to the manufacturing process used to create the wrench. In this process, the metal (usually steel) is heated and then shaped using a forging press or hammer. Drop forging enhances the strength and durability of the tool, making it more resilient when subjected to heavy usage.

  2. Hardened Jaws: Hardened jaws are a crucial feature of an adjustable spanner. The jaws are the part of the wrench that contacts the fastener. Hardening the jaws involves treating the metal to increase its resistance to wear and deformation. This ensures that the jaws remain in good shape even when used on tough or stubborn fasteners.

  3. Heavy-Duty: The term "heavy-duty" indicates that the adjustable spanner is designed to handle demanding tasks. It is built to withstand higher torque levels and more substantial loads. Heavy-duty adjustable spanners are suitable for professional and industrial applications where standard wrenches might not be robust enough.

Adjustable spanners are popular for their versatility because they can be adjusted to fit a wide range of fastener sizes. They typically have a moveable jaw that can be positioned to fit the specific nut or bolt. The screw-like adjustment mechanism in the wrench allows you to change the jaw width, making it adaptable to various fastener sizes.

These features make a drop-forged, hardened jaws, and heavy-duty adjustable spanner a reliable tool for tasks that require high torque or involve tough fasteners. It's commonly used in automotive repair, construction, plumbing, and other mechanical applications where durability and strength are essential. When using such a wrench, it's important to follow proper safety practices and choose the right size to avoid damaging the tool or the fastener. Certainly, here's some additional information about drop-forged, hardened jaws, and heavy-duty adjustable spanners:

  1. Materials: These adjustable spanners are typically made from high-quality steel. The use of high-quality materials and the manufacturing process, such as drop forging, ensure the spanner's durability and resistance to wear.

  2. Adjustment Mechanism: The adjustment mechanism on an adjustable spanner typically consists of a worm screw and a jaw that moves along a threaded section. Turning the screw allows the user to change the width of the jaws to fit different fastener sizes.

  3. Torque Handling: Heavy-duty adjustable spanners are designed to handle high torque levels. They can be used for tasks that require significant force to tighten or loosen fasteners. However, it's important to use them carefully to avoid over-tightening, which can damage the fastener or the tool.

  4. Safety Considerations: When using heavy-duty adjustable spanners, make sure to use the correct size for the fastener, as using an improperly sized spanner can lead to slippage and accidents. Additionally, ensure that the wrench is in good condition, with the jaws properly aligned and free from damage or wear. Applications: Heavy-duty adjustable spanners are commonly used in construction, mechanical repair, and maintenance tasks. They are invaluable in applications where the fastener size may vary, and a single tool needs to accommodate different sizes. Size Range: Adjustable spanners are available in various sizes to accommodate a wide range of fasteners. The size is typically measured by the length of the wrench.

View Complete details

get quote request a call back
  • Ring Spanner
  • Ring Spanner
  • Ring Spanner
Ring Spanner

Ring Spanner

Rs 99  / PieceGet Best Price
Type Of SpannerRing Spanner
Size6X7 TO 80X85
PackagingBox
MaterialCRV
FinishingChrome Plated
ColorSilver
Usage/ApplicationGarage
Warranty1 Year
Head ShapeRound
Country of OriginMade in India
we are the leading suppliers in this industry we cater all types of client all over india we provide products in bulk and at best price possible.

View Complete details

get quote request a call back
  • Hook Spanners
  • Hook Spanners
  • Hook Spanners
Hook Spanners

Hook Spanners

Rs 999  / PieceGet Best Price
Size14 mm
Type Of SpannerHook Spanners
PackagingPacket
MaterialCarbon Steel
Measurement SystemMetric, SAE
FinishingPolished
ColorSilver
Usage/ApplicationGarage
Warranty1 Year
Country of OriginMade in India
we are the leading suppliers in this industry we cater all types of client all over india we provide products in bulk and at best price possible.

View Complete details

get quote request a call back
  • Ring Spanner
  • Ring Spanner
  • Ring Spanner
Ring Spanner

Ring Spanner

Rs 99  / PieceGet Best Price
Type Of SpannerRing Spanner
MaterialChrome Vanadium Alloy Steel
Size1/4X5/16 - 1.1/8X1.1/4
PackagingBox
Measurement SystemSAE, Metric
FinishingChrome Plated
ColorSilver
Usage/ApplicationBolt Tightening And Loosening
Warranty1 Year
Product TypeRing Spanner
Country of OriginMade in India
we are the leading suppliers in this industry we cater all types of client all over india we provide products in bulk and at best price possible.

View Complete details

get quote request a call back
  • Heavy Duty Flogging Spanner SAE-3/4" TO SAE-5.3/4"
  • Heavy Duty Flogging Spanner SAE-3/4" TO SAE-5.3/4"
  • Heavy Duty Flogging Spanner SAE-3/4" TO SAE-5.3/4"
  • Heavy Duty Flogging Spanner SAE-3/4" TO SAE-5.3/4"
  • Heavy Duty Flogging Spanner SAE-3/4" TO SAE-5.3/4"
  • Heavy Duty Flogging Spanner SAE-3/4" TO SAE-5.3/4"
Heavy Duty Flogging Spanner SAE-3/4" TO SAE-5.3/4"

Heavy Duty Flogging Spanner SAE-3/4" TO SAE-5.3/4"

Rs 250  / PieceGet Best Price
Size18 inches
Type Of SpannerHammering Spanner
PackagingBox
MaterialChrome Vanidium
FinishingBlack Phosphate
ColorBlack
Usage/ApplicationBolt Tightening And Loosening
Warranty1 Year
Head ShapeRound
ApplicationGarage
Country of OriginMade in India
SAE (Society of Automotive Engineers) slogging spanners, often referred to as slugging wrenches or hammer wrenches, are used for heavy-duty applications where traditional wrenches may not provide sufficient torque. These spanners are designed to be struck with a hammer or mallet to tighten or loosen stubborn fasteners. They typically have a flat striking surface on one end and a wrenching surface on the other.
Here's a general chart of common SAE slogging spanner sizes, along with their corresponding sizes in inches:
1 inch (25.4 mm)1 1/16 inches (26.99 mm)1 1/8 inches (28.58 mm)1 1/4 inches (31.75 mm)1 5/16 inches (33.34 mm)1 3/8 inches (34.93 mm)1 7/16 inches (36.51 mm)1 1/2 inches (38.10 mm)1 5/8 inches (41.28 mm)1 3/4 inches (44.45 mm)1 7/8 inches (47.63 mm)2 inches (50.80 mm)2 1/8 inches (53.98 mm)2 1/4 inches (57.15 mm)2 3/8 inches (60.33 mm)2 1/2 inches (63.50 mm)2 5/8 inches (66.68 mm)2 3/4 inches (69.85 mm)2 7/8 inches (73.03 mm)3 inches (76.20 mm)Please note that this is a general chart, and there can be variations in sizing based on the manufacturer and specific product lines. Always refer to the manufacturer's specifications or markings on the tools themselves for precise sizing information. Additionally, it's essential to use these tools with caution and wear appropriate safety gear when striking them with a hammer or mallet, as they can generate significant force.
American slogging spanners, also known as slugging wrenches or striking wrenches, typically follow the SAE (Society of Automotive Engineers) sizing system, which is based on inches. These wrenches are designed for heavy-duty applications and are meant to be struck with a hammer or mallet to apply a high amount of torque. Here are some common American slogging spanner sizes in inches:
3/4 inch American slogging spanner7/8 inch American slogging spanner1 inch American slogging spanner1 1/8 inch American slogging spanner1 1/4 inch American slogging spanner1 3/8 inch American slogging spanner1 1/2 inch American slogging spanner1 5/8 inch American slogging spanner1 3/4 inch American slogging spanner1 7/8 inch American slogging spanner2 inch American slogging spanner2 1/8 inch American slogging spanner2 1/4 inch American slogging spanner2 3/8 inch American slogging spanner2 1/2 inch American slogging spanner2 5/8 inch American slogging spanner2 3/4 inch American slogging spanner2 7/8 inch American slogging spanner3 inch American slogging spannerThese sizes correspond to the diameter of the fasteners or nuts that the American slogging spanner is designed to work with. It's important to choose the correct size spanner for your specific application to ensure a proper fit and avoid damaging the spanner or the fastener.
When using American slogging spanners, always follow safety guidelines, wear appropriate personal protective equipment, and use the proper technique when striking the spanner with a hammer or mallet to avoid injury, as these tools can generate significant force.

View Complete details

get quote request a call back
  • Single Ended Ring Spanner
  • Single Ended Ring Spanner
  • Single Ended Ring Spanner
Single Ended Ring Spanner

Single Ended Ring Spanner

Rs 500  / PieceGet Best Price

Product Brochure

Type Of SpannerMetric Deep Ring Spanner
MaterialStainless Steel
Size55mm
PackagingBox
BrandGedore
Model Name/NumberGedore 6481910
Usage/ApplicationAutomobile Industry
Warranty1 Year
Measurement SystemMetric, SAE
ColorGrey
Country of OriginMade in India
Product Description single ended ring spanner

· Drop Forged Made from Chrome Vanadium Steel 31CrV 3

· Hardened & Tempered

· Chrome Plated/ Zinc Finish/ Satin Finish

Size

Length

Weight

Packing

mm

mm

Kg.

Master Cartons

32

265

0.350

60

36

295

0.485

40

41

330

0.695

30

46

365

0.960

20

50

400

1.255

20

55

445

1.590

12

60

475

1.820

12

65

510

2.220

10

70

555

3.000

8

75

590

3.395

6

80

620

4.100

6

85

665

4.650

4

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner

Single Ended Ring Spanner




 

 

View Complete details

get quote request a call back
Double Ended Open Spanner

Double Ended Open Spanner

Rs 999  / PieceGet Best Price
Type Of SpannerDouble Open End Spanner
Size55mm & 60mm
PackagingBox
MaterialAlloy Steel
BrandPROTO USA
FinishingGunmetal finish
ColorSilver, Black
Usage/ApplicationGarage
Warranty1 Year
Length500mm

A phosphate coating not only gives this 55mm & 60mm double open-ended spanner a smooth, matte finish, it also protects the core of the tool from corrosion. This matte finish also promotes better grip, leading to less slipping in the hand when in use.

This is the type of quality finish you would expect from Bahco, which is why their tools are so popular. Made from alloy steel, there is a 15°offset angle so that each head can make a strong purchase on bolts and fixings.

Features
  • Gunmetal finish
  • Phosphate coating protects from corrosion
  • Open end angle of 15°
  • Made from high quality steel alloy
  • Ideal for a range of applications
  • Conforms to standards: ISO 1085 & DIN 895

View Complete details

get quote request a call back
Flare Nut Ring Spanner Set

Flare Nut Ring Spanner Set

Rs 999  / PieceGet Best Price
Type Of SpannerFlare nut spanner
MaterialCarbon Steel
PackagingBox
BrandKennedy
ColorSilver
Usage/ApplicationGarage
WarrantyNo Warranty
Product CodeKEN5823659K
Weight0.7 kg
Dimensions25 x 5 x 5 cm
  • Conform to ASME B107.4. Made from high quality chrome vanadium steel.
  • Satin finish body with highly polished heads.
  • Offset ends.
  • The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes, brake pipes etc. Contents 1/4″ x 5/16″, 3/8″ x 7/16″, 1/2″ x 9/16″, 5/8″ x 11/16″ and 3/4″ x 7/8″.
  • Includes : (5) Spanners

View Complete details

get quote request a call back
Tubular Box Spanners Heavy Duty

Tubular Box Spanners Heavy Duty

Rs 100  / PieceGet Best Price
Type Of SpannerHeavy Duty
Size65x70mm
PackagingPacket
MaterialMade Out of Selected Tubing.
BrandDeneers
Measurement SystemMetric
FinishingPolished
ColorSilver
Usage/ApplicationGarage
Warranty1 Year
Country of OriginMade in India
De Neers 65x70mm Heavy Duty Tubular Box Spanner is a premium quality product from De Neers.  All De Neers 65x70mm Heavy Duty Tubular Box Spanner are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture De Neers 65x70mm Heavy Duty Tubular Box Spanner, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. De Neers products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of Box Spanners .

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES