|Material||Chrome Vanadium Alloy Steel|
|Type Of Spanner||Slogging spanner|
|Country of Origin||Made in India|
SAE (Society of Automotive Engineers) slogging spanners, often referred to as slugging wrenches or hammer wrenches, are used for heavy-duty applications where traditional wrenches may not provide sufficient torque. These spanners are designed to be struck with a hammer or mallet to tighten or loosen stubborn fasteners. They typically have a flat striking surface on one end and a wrenching surface on the other.
Here's a general chart of common SAE slogging spanner sizes, along with their corresponding sizes in inches:
1 inch (25.4 mm)1 1/16 inches (26.99 mm)1 1/8 inches (28.58 mm)1 1/4 inches (31.75 mm)1 5/16 inches (33.34 mm)1 3/8 inches (34.93 mm)1 7/16 inches (36.51 mm)1 1/2 inches (38.10 mm)1 5/8 inches (41.28 mm)1 3/4 inches (44.45 mm)1 7/8 inches (47.63 mm)2 inches (50.80 mm)2 1/8 inches (53.98 mm)2 1/4 inches (57.15 mm)2 3/8 inches (60.33 mm)2 1/2 inches (63.50 mm)2 5/8 inches (66.68 mm)2 3/4 inches (69.85 mm)2 7/8 inches (73.03 mm)3 inches (76.20 mm)Please note that this is a general chart, and there can be variations in sizing based on the manufacturer and specific product lines. Always refer to the manufacturer's specifications or markings on the tools themselves for precise sizing information. Additionally, it's essential to use these tools with caution and wear appropriate safety gear when striking them with a hammer or mallet, as they can generate significant force.
American slogging spanners, also known as slugging wrenches or striking wrenches, typically follow the SAE (Society of Automotive Engineers) sizing system, which is based on inches. These wrenches are designed for heavy-duty applications and are meant to be struck with a hammer or mallet to apply a high amount of torque. Here are some common American slogging spanner sizes in inches:
3/4 inch American slogging spanner7/8 inch American slogging spanner1 inch American slogging spanner1 1/8 inch American slogging spanner1 1/4 inch American slogging spanner1 3/8 inch American slogging spanner1 1/2 inch American slogging spanner1 5/8 inch American slogging spanner1 3/4 inch American slogging spanner1 7/8 inch American slogging spanner2 inch American slogging spanner2 1/8 inch American slogging spanner2 1/4 inch American slogging spanner2 3/8 inch American slogging spanner2 1/2 inch American slogging spanner2 5/8 inch American slogging spanner2 3/4 inch American slogging spanner2 7/8 inch American slogging spanner3 inch American slogging spannerThese sizes correspond to the diameter of the fasteners or nuts that the American slogging spanner is designed to work with. It's important to choose the correct size spanner for your specific application to ensure a proper fit and avoid damaging the spanner or the fastener.
When using American slogging spanners, always follow safety guidelines, wear appropriate personal protective equipment, and use the proper technique when striking the spanner with a hammer or mallet to avoid injury, as these tools can generate significant force.